JBC PHBE-1KA 120V Convection Preheater Set

SKU JBC-PHB-1KA
Heating area 360 x 277 mm. The most complete solution to preheating large PCBs. Essential for soldering on multilayered boards. Uniform heat distribution with 2 independent heating zones. The heater is protected by high resistance glass. It has 3 adjustable heights and can fit all sizes and shapes of PCBs. 3 preset temperature profiles and 20 more user defined profiles. The Control Thermocouple follows a temperature profile precisely and the auxiliary Thermocouple protects PCB´s components.
Large Unit Dimensions (inches): 23.43x20.47x7.09
Item Weight: 26.42 lb
(0)No Reviews yet

Details

Product Composition

1 Heater unit 1 Console 1 PSB Large PCB Support 2 PH218 Thermocouple Type K 1 PH217 Kapton Tape for PCBs Reduce the risk of thermal shock while reworking PHBK Large Preheater Set is the best solution for rework on medium / large PCBAs, such as the once commonly used in circuits boards and/or lap tops. It features a heating area of 360 x 277 mm / 14.2 x 10.9 in. and four TC connections. Matchless reliability in temperature accuracy and control of the PCBA so that no component is damaged. The Preheater can be operated easily and conveniently via the intuitive menu navigation. It features three work modes: Power Mode allows working at a fixed power level with the option of using protection thermocouple. Temperature Mode keeps the PCBA at a selected temperature, using the regulation thermocouple and, optionally, protection thermocouples. Profile Mode allows control of the heating rate of the PCBA by the use of a control and protection thermocouple, without exceeding the recommended limit levels in each application. It features 22 customizable profiles. Up to four thermocouples can be connected in any of the three work modes. PSB Large PCB Support is perfectly adapted to any type of PCBs by means of its many adjustable components and its 3 adjustable clearance positions 28, 38 or 48 mm / 1.1, 1.5 or 1.9 in. By means of JBC Software, the Preheater can be synchronized with other JBC Hot Air, Soldering Stations as well as Fume Extractor equipment in order for them to work jointly and to perform your rework process optimally.

Specifications

   
Voltage: 120V
Maximum Power 1800W
Heating Area 180 x 277 mm (1 zone)
  360 x 277 mm (2 zones)
Temperature Range 50 to 250ºC (120 to 482ºF)
Temperature Measurement Thermocouple type K
JBCset Temperature Profiles 3 profiles ( 2, 3 or 4 steps)
User Temperature Profiles 20 (up to 6 steps for each)
Maximum work time: 600 min. or indefinite
Fuse 15 A T

Product SDS, TDS, Manuals

Documentation 

Manuals: 

Convection Preheater Set Manual (3.13 Mb) 

Troubleshooting 

Exploded View: PHB-KA Exploded View (312 Kb)

Product Dimensions (in): Length

23.43

Width

20.47

Height

7.09

Weight

26.42

Ratings & Reviews

No reviews available

Be the first to Write a Review